Master-force 241-0431 Manual do Operador descarregar pdf (Página 10)

TO ATTACH BATTERY

PACK (FIG.1)

WARNING:

When placing the

battery pack on the tool, be sure that the

raised rib on the battery pack aligns with

the groove on the saw and the latches snap

into place properly. Improper assembly of

the battery pack can cause damage to

internal components.

1. Lock the trigger switch in the “OFF”

position.

2. Align the raised rib on the battery pack

with the grooves on the bottom of the saw,

and then attach the battery pack to the saw.

NOTICE: Make sure that the latch on the

battery pack snaps into place and the

battery pack is secured to the tool before

beginning operation.

TO DETACH BATTERY

PACK (FIG. 1)

1. Lock the trigger switch in the “OFF”

position.

2. Depress the battery release buttons

located on the front of the battery pack to

release the battery pack.

3. Pull the battery forward to remove from

the tool.

VARIABLE SPEED TRIGGER

SWITCH (FIG. 2)

Your reciprocating saw is equipped with a

trigger switch to turn the saw on and off and

to control the speed.

1. To start the saw, depress the lock-off

button and then squeeze trigger switch.

2. To stop the saw, release the trigger switch

and allow it to return to the “OFF” position.

3. To vary the speed, simply increase

or decrease the pressure on the trigger

switch. The more tightly the trigger switch is

squeezed, the higher the speed.

LED WORKLIGHT (FIG. 3)

Your reciprocating saw has a built-in LED

worklight for illuminating the cutting area.

To activate the LED worklight, squeeze

the lock-off button and depress the trigger

switch to start the saw.

DETACH

ATTACH

OPERATION

FIG. 1

Lock-off

button

Trigger

switch

FIG. 2

LED worklight

FIG. 3

Page 9

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Comentários a estes Manuais

Sem comentários