Master-force 241-0431 Manual do Operador descarregar pdf (Página 13)

BLADE SELECTION

In order to obtain the best

performance from the saw, it is

important to select the correct blade

for the particular application and type

of material to be cut.

Blades with fewer teeth, such as

those with 10 teeth per inch (TPI),

are typically used for cutting wood,

while blades with more teeth are

better for cutting metal or plastic.

We recommend 14 TPI for plastics

and soft metals and 18 TPI for hard

metals.

INSTALLING A SAW BLADE (Fig. 5)

1. Remove the battery pack from the

saw.

2. Rotate the blade clamp

counterclockwise and hold it

open.

3. Insert saw blade until it is fully

seated, and release the blade clamp to secure the blade in position.

REMOVING THE SAW BLADE (Fig. 5)

1. Remove the battery pack from the saw.

2. Rotate the blade clamp counterclockwise and hold it open.

3. Remove the saw blade from the blade clamp.

WARNING! The saw blade may be hot after use. Allow the blade to cool or

wear gloves when removing a blade.

Fig. 4

LED worklight

Fig. 5

Blade

Blade clamp

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19

Sem comentários

Master-force 241-0431 Manual do Operador Página 13