Master-force 241-0854 Manual do Operador descarregar pdf (Página 7)

Page 6

SAFETY INSTRUCTIONS

9. Whenever possible, use clamping

devices or other suitable means to secure

the workpiece to a rm surface.

10. When working with the Utila-tool,

always hold it rmly with both hands and

provide for a secure stance. The power tool

is guided more securely with both hands.

11. Keep your workplace clean. Blends of

materials are particularly dangerous. Dust

from light alloys can burn or explode.

12. Avoid unintentionally switching on the

tool. Ensure that the on/off switch is in

the OFF position before connecting to the

power source. Do not carry the power tool

with your nger on the on/off switch or

connect to the power source that have the

switch on.

13. Do not scrape wet or dampened

materials (e.g., wallpaper) or on moist

surfaces. Penetration of water into the tool

increases the risk of an electric shock.

14. Keep your hands away from the cutting

area. Do not reach under the material

being cut.

15. When operating a power tool outside,

use an outdoor extension cord marked

“W-A” or “W”. These cords are rated for

outdoor use and reduce the risk of electric

shock. The following table shows the correct

size to use, depending on cord length and

nameplate amperage rating of the tool.

When in doubt, use the next heavier gauge.

Always use UL and CSA listed extension

cords.

Recommended sizes of extension cords:

Tool’s Ampere Rating Volts

Total length of cord in feet

Cord size in A. W. G. (minimum)

25’ 50’ 100’ 150’

0-6

120 V~

18 16 16 14

6-10 18 16 14 12

10-12 16 16 14 12

12-16 14 12 Not Recommended

1 2 3 4 5 6 7 8 9 10 11 12 ... 23 24

Comentários a estes Manuais

Sem comentários